How to Paint Cinder Block Wall To Look Like Stone

Due to its dull appearance and dull grey tone, cinder block is regarded as the most offensive building material. Despite being frequently utilized in modest projects or apartment renovations, it is viewed as a cheap material with the lowest aesthetic value.

However, there are techniques for transforming a cinder block wall into a beautiful work of art. The cinder block can be attractive with just a few paint cans and a little skill.

cinder block to look like stone

We’ll show you in this article how to paint cinder block walls to resemble stone. It’s easy to accomplish this accomplishment, and you’ll surely enjoy the outcome.

How Will It Look in the End?

You will be forced to thank us for this essay when the project is over. Sometimes people become sick of looking at that cinder wall since it’s so dull and lifeless. With only a touch of whimsy added, this project will completely transform it, making it appear more like a stone brick wall than an actual stone.

Although there are ways to transform it into the most aesthetically pleasing stone wall, this guide is intended for a relatively easy project that even the most inexperienced hands can complete.

Steps for Painting a Cinder Block Wall to Look Like Stone

Although painting a cinder wall is simple, there are a few key stages. We’ll walk you through each step to make the tutorial simple.

Step 1: Compile the Tools

You need to set up some tools before getting into full work mode.

  • priming paint
  • Power washer
  • 3-inch painting tool
  • concrete cleanser
  • little shoeboxes
  • Paint in latex (4 colors: brown, tan, gray, and cream)
  • Plaster tape

Step 2: Clean the cinder block wall

The surface needs to be sufficiently clean for the paint to adhere. Cinder block walls produce a form of powdery white stain called efflorescence. After a prolonged period of exposure to a high moisture environment, this powdery substance appears on its surface.

You must thoroughly clean the cinder block canvas and remove all the powders and stains before you can paint on it. A pressure washer that sweeps the dust away does an excellent job cleaning the cinder wall. To thoroughly clean each brick component, use the brick cleaner.

The brick cleaner can be replaced with a garden hose or water sprayer.

However, avoiding soap for this purpose is best because it will not be as effective as on dishes. Additionally, applying soap will delay the wall’s drying time.

Wait at least 24 hours after thoroughly washing the wall before moving on to the next step.

Step3: priming

Even though the wall is sufficiently clean for painting, you shouldn’t do it just yet. Cinder blocks will absorb much of the paint because of their porous surface. As a result, the hue will not be as you had anticipated.

To get the wall ready for painting, prime it with paint. The primer will fill the surface’s many holes and fissures to prevent the paint from being absorbed. Additionally, the pH of the wall will be neutralized.

For the cinder wall, utilize primers with a latex acrylic base. This kind of primer dries quickly and is adaptable and robust. This acrylic may be purchased from practically any home improvement retailer.

Start by rolling the primer with the paint roller along the four sides of the wall. Before advancing to the following block, paint each block on the wall separately. After that, wait 24 hours for the primer to dry before continuing.

Step 4: Tape the grout lines 

The most crucial action to take is to lay a grout line. The crevices between two stone blocks known as grout lines are filled with grout. To make the wall appear made of stone, you must either draw new lines or maintain the ones that already exist while painting.

You can use painter’s tape to create the grout line. Use it to tape the openings between the blocks to prevent paint from getting there.

Step 5: Prepare the paint tray. 

We’re using shoe boxes to create a paint tray. A similar thing may be accomplished using a cardboard box containing 24 soda cans. Insert a plastic garbage bag over the box. In four separate locations, pour the four colors. The normal flat box will tend to keep the paint in level, not like any regular paint tray.

Step 6: Create the shades 

A stone wall will never have a consistent tint because stone comes in a variety of shades. Therefore, you must create the various shades that you want to paint. We choose brown, tan, grey, and cream since you may mix them to create a variety of unique tones.

Put a few small dots of each hue in their spot on the paint tray. To produce a natural stone impression, you must combine different paint swatches while painting.

Consider blending cream with tan for one shade, grey with cream for another, and grey with brown for yet another. These will give the wall a variety of textures.

Step 7: Wall Painting

Start painting the wall after dipping the paintbrush in a few colors. However, testing your technique on some scrap cardboard is wise first.

Every time you paint, choose one block and finish it before going on to the next block. You’ll need to keep painting, so each block has a unique combination of colors from the previous one.

Avoid painting the grout line and the spaces between the blocks while working. The paint you’re now applying needs to be clear of these areas between the blocks.

A benefit of replicating a stone is that the hue of each stone doesn’t have to be perfectly uniform. However, one stone’s color combination should differ from the stones around it.

Avoid overlapping at all costs if you’re using a roller, and move it softly in a vertical direction. If not, the color will become uneven.

Take off the painter’s tape to reveal the grout line when you’re through painting. Before putting any furniture in front of the painted surface, give it a day to dry.

The whole process is essentially finished once the paint has dried. You can now see the wall’s façade, which resembles stone.

block-wall-design-ideas-color-pattern-texture

Going Above and Beyond

You can see how easy it is to make the cinder block wall appear stone. Mix colors and adhere to the grout lines. However, some people want to go above and beyond by giving the paint a faux finish and adding depth. Some people prefer to add a glossy finish on top.

Achieving this faux finish should be easy if you are skilled with a paintbrush and paint. Painters are renowned for adding highlights and shadows to their work to highlight depth and character.

However, if you are a newbie and still want to achieve the perfect rocky finish on your wall, there is a simple method for you. Grab a sponge, dab it with some heavy paint, and press it on the stone paint. This technique will highlight the appearance’s gritty texture, giving it an actual rocky impression.

Finally, coat the wall with a concrete sealer to shield it from stains and water damage. The sealer will also preserve the faux-grainy finish on the wall.

Additional note: Think about purchasing textured paint.

Being a novice, you must be considering how to make painting simpler. The good news is that. There are specialist paints on the market that also offer a tactile benefit. You can get textured paints that will make it much simpler to highlight the stone-like characteristic on your cinder block wall.

Stone, sand, and suede are the three most prevalent varieties of textured paint. To apply this paint, a paint roller is required. Although these paints are a little more expensive, they are unquestionably worthwhile.

Can I use water paint on a cinder block wall?

Cement and cinder are combined to create cinder blocks. As you can see, since cement tends to absorb water, much water is required for its manufacture. You were instructed to let the cinder block wall dry for at least a full day at the beginning of the article, even after scrubbing it with water.

Therefore, most of the water-based paint that is applied to it absorbs inside the block. As a result, the color you were expecting to see on the block is not present. So it makes sense to use oil paint rather than water paint.

However, you can use water-based paint to make the wall look like a stone if you properly primed it with a latex-based primer.

painting_cinder_block_walls for stone looks

Last Words

In the end, since it’s your wall that needs to be painted and textured, you should be the one to make such decisions. There is no need to confine oneself to the four categories of color we have described.

Since you now understand how to paint cinder block walls to resemble stone, don’t be hesitant to experiment with fresher hues and textures. The strange appearance of the stones is irrelevant because no two stones are identical, let alone stone walls.

Add a Comment

Your email address will not be published.